#Sony firmware update blu ray update
The Network Update operation is straightforward, so it is highly recommended that you use the Network Update method to update the BDP-S190/S390 firmware Please see the Download the Firmware and Create an upgrade Disc section, for more information.If you cannot connect the Blu-ray Disc player to your Internet source, please use the disc upgrade method.Please see the Network upgrade Instructions section, for more information.You will need to connect the Blu-ray Disc player to your Internet source using an Ethernet cable.The Network upgrade operation is straightforward, so it is highly recommended that you use the Network upgrade method.There are two ways to perform the BDP-S190/S390 Firmware update:
#Sony firmware update blu ray install
The firmware version currently installed on the Blu-ray Disc player will be listed on the television screen If the last four digits of the version number are 0502 or higher, it is not necessary to install this firmware upgrade.Use the arrow keys to select System Information, and then press the ENTER button.Use the arrow keys to select Quick Start Mode and make sure that the Quick Start Mode is set to Off If the Quick Start Mode is set to On, change the setting to OffOtherwise, the firmware update may not succeed.Use the arrow keys on the remote control to select Setup – System Settings, and then press the ENTER button.If the player starts to play a disc, press the STOP button and wait until the xross media bar™ menu is displayed on the television before proceeding.Power on the television and make sure it is tuned to the inputs to which the Blu-ray Disc player is connected.Recommended Operating System for the computer to create an upgrade disc: This utility updates BDP-S190/S390 firmware to version M11.R.0502 and provides the following benefits: This utility is only for use with the products identified and sold in Asia PacificNot all models are sold in all countries
0 kommentar(er)
